BluSoak Stakes, mega long 7″

$0.50 + Tax

82 in stock

Product Description

BluSoak Drip Tape Hold-Down Stake Long Mega by the bulk, purchase whatever quantity you want. The are cheaper than most stakes found on the market but work much better for holding down soaker hose / drip tape.
They also do not rust because they are made of high quality plastic rather than metal.
Approximately, 7″ tall, and 1″ wide.

There are no reviews yet.

Be the first to review “BluSoak Stakes, mega long 7″”

Quick Comparison

SettingsBluSoak Stakes, mega long 7" remove3/4" Female Hose Thread (FHT) to 8mm Barbed Insert - Garden Hose Adapter removeQuick Connect Bulkhead Fitting w/ Stop On Both Ends, 8mm removeBlumat Distribution Dripper removeBlumat Distributor Drippers (Ten) + 2m of Drip Tube remove3mm Blumat Tees remove
Image
SKU864593W375968DZ867371318647MC936999795341F
Rating
Price$0.50 + Tax$6.00 + Tax$17.60 + Tax$1.40 + Tax$18.25 + Tax$1.10 + Tax
Stock

82 in stock

2 in stock

2 in stock

142 in stock

13 in stock

23 in stock

Availability82 in stock2 in stock2 in stock142 in stock13 in stock23 in stock
Add to cart

Description
ContentBluSoak Drip Tape Hold-Down Stake Long Mega by the bulk, purchase whatever quantity you want. The are cheaper than most stakes found on the market but work much better for holding down soaker hose / drip tape. They also do not rust because they are made of high quality plastic rather than metal. Approximately, 7" tall, and 1" wide.Conventional Garden Hose Adapter for a 3/4" Female Hose Thread to 8mm Barbed Insert, easiest way to connect your 8mm tubing to a conventional hose or any 3/4" male hose outlet. Extremely hard to find anywhere but we managed to find it internationally and have it shipped to us. This is product to save you a hardware trip, added to our website for your inconvenience.High quality, easy to use bulkhead fittings that automatically stop the water at both ends when a line is disconnected. Just a quick twist connects or disconnects supply tubing. Great for flushing -- quickly change from a reservoir with nutrients to one with just water. Also very helpful if you use different nutrients at different times. We also have adapters so you can connect these to 3mm or 1/4" line.Each Tropf Blumat can control 5 of these distribution drippers and saturate a 40" length - either in a row or around a large plant. In a pressure system, by adjusting the black screw, it's possible to do more than 5 but with a gravity system, usually better to stay with 2-3. If your plants and conditions are the same, you can also put one Tropf Blumat in the first pot with one distribution dripper and one or two in each plant after that. One customer reported doing this successfully with 25 distribution drippers running off just one Blumat sensor.These are great for watering long plant beds, planter boxes, and giving large plants an even amount of water in a circle around them. They connect to a Tropf-Blumat or a Maxi.This is less expensive than adding more sensors but you may need to add a filter to your system if you use nutrients in your water so they don't clog. This pack contains 10 distributors and 2 meters of (6.5 feet) of 3mm drip tubing. Two nozzles allow you to connect tubing on both sides of the dripper for up to five drip locations from one Tropf-Blumat (dripper chain). The end-distributor dripper has a drip nozzle on one side only for use as the end piece in a dripper chain. You can go as far as 100 cm (39") from the sensor with these and they water about 20 cm wide (8"). Minimum pressure to use them like this is 4.5 psi. You can go down as low as 2 psi but the last dripper or two might not put out much water. By adjusting the black screw on the top, you can use more. In pressure systems, customers report successfully using as many as 25 with just one Blumat sensor. Set includes: 10 distribution drippers (8 regular + 2 end drippers) 2 meters (6.5 ft) 3mm drip tubeUse these to branch out and run distribution drippers in two directions. You can also put them directly into a 1/2" or 3/4" drip line and install two Blumat sensors.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information