Blumat Distribution Drippers- End Pieces, Individual

$1.29 + Tax

31 in stock

Product Description

Use these to end a Blumat distribution line. The regular distribution drippers have barbs on both sides so you need a way to end them without water dripping out too fast. You can do that with an end cap (IG15509) or with one of these. They are less expensive than the standard drippers and much easier to take on and off than the end caps. The end caps often need pliers to remove but they just pull on and off.

There are no reviews yet.

Be the first to review “Blumat Distribution Drippers- End Pieces, Individual”

Quick Comparison

SettingsBlumat Distribution Drippers- End Pieces, Individual removeRed 8mm Super-Flex Tubing Blumat remove3mm Drip Tube for Blumat Systems remove8mm BULKHEAD / Through-Hull Tank Connector removeTropf Blumat 5" Sensor removeBlumat 8mm Elbows remove
Image
SKUY487379M620810717378B774683P
Rating
Price$1.29 + Tax$9.00$39.00 + Tax$8.25$26.75 + Tax$3.65 + Tax$7.99 + Tax$1.10 + Tax
Stock

31 in stock

3 in stock

14 in stock

40 in stock

Availability31 in stock3 in stock14 in stock40 in stock
Add to cart

Description
ContentUse these to end a Blumat distribution line. The regular distribution drippers have barbs on both sides so you need a way to end them without water dripping out too fast. You can do that with an end cap (IG15509) or with one of these. They are less expensive than the standard drippers and much easier to take on and off than the end caps. The end caps often need pliers to remove but they just pull on and off. This 8mm Super-Flex Tubing is the highest quality tubing we could find for blumat carrots and blumat watering systems. It is extruded from the highest quality silicone we could source. The material has a hardness rating of 60 Shore A and is heat-stabilized to withstand up to 500 degrees Fahrenheit, or 230 Celsius.This 3mm tubing is ideal for blumat watering systems and other unique irrigation applications. This is the sizing that is included with each blumat. This tubing runs through the caps/tops of each tropf blumat as well as the classic models. This 3mm tubing size is also the tubing size designed for integrating distribution drippers to blumat systems. If you want to string drippers around your container, you will want some of this tubing! This 3mm silicone tubing is also ideal for integrating BluSoak drip tape to blumat watering systems as well. This is really the choice tubing for automatic drip irrigation kit(s) and any blumat watering system.Connect a blumat system to a rain barrel or water storage tank. Just screw half on the inside of the tank, the other on the outside. The nipple connects to the standard blumat 8 mm water supply/feed line. You can either start with one of these bulkheads, or a blumat pressure reducer--either of these fittings will "start" your blumat watering system. blumat Classic Jr and blumat xl do not require either. Use 1/2" drill bit to puncture hole.The Tropf-Blumat (Tropf means drip in German) is a sensor that automatically supplies plants water through its thin tubing. This ceramic cone employs the principle of hydrostatic pressure, that delivers water extremely slowly, and at the plant’s own preferred rate. Allowing each plant to determine its own irrigation schedule.If you have lots of room and can easily make large, round bends; you won't need elbows. If you're in a smaller space though, they will save you lots of room and prevent kinking. See the pictures here for examples of using them to go up and down in raised beds.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Attribute

10' roll, 50' roll

Attribute

50' Roll, 10' Roll